Real-time structural health monitoring (SHM) using strain gauge Arduino sensor at reinfocement concrete under static and impact loading

Vega Aditama; Sri Murni Dewi; Ari Wibowo; Ming Narto Wijaya

doi:10.1063/5.0202079

Real-time structural health monitoring (SHM) using strain gauge Arduino sensor at reinfocement concrete under static and impact loading

Vega Aditama^*
, Sri Murni Dewi
, Ari Wibowo
, Ming Narto Wijaya

^*Corresponding author for this work

Faculty of Engineering

Research output: Contribution to journal › Conference article › peer-review

3 Citations (Scopus)

Abstract

The Strong and safe Building is designed to avoid structural failure from an earthquake or the other causes. Internet of Things (IoT) based real-time wireless sensors were used in BF 350 AA Arduino module to measure the strain of reinforcement and concrete of structural member in the building. The collapse of the structure can be detected and the weakening of the building structure through reinforcement and concrete can be reported using wifi-based strain sensors under static and impact load in non-destructive measurement, used for long periods and can real-time monitorize.

Original language	English
Article number	050046
Journal	AIP Conference Proceedings
Volume	3077
Issue number	1
DOIs	https://doi.org/10.1063/5.0202079
Publication status	Published - 12 Jul 2024
Event	2022 Transdisciplinary Symposium on Engineering and Technology: Development of Digital and Green Technology on Post Pandemic Era, TSET 2022 - Yogyakarta, Indonesia Duration: 21 Sept 2022 → …

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 11 Sustainable Cities and Communities

Access to Document

10.1063/5.0202079

Cite this

@article{aa18371d7f5a41f8b997f7b7a941d06b,

title = "Real-time structural health monitoring (SHM) using strain gauge Arduino sensor at reinfocement concrete under static and impact loading",

abstract = "The Strong and safe Building is designed to avoid structural failure from an earthquake or the other causes. Internet of Things (IoT) based real-time wireless sensors were used in BF 350 AA Arduino module to measure the strain of reinforcement and concrete of structural member in the building. The collapse of the structure can be detected and the weakening of the building structure through reinforcement and concrete can be reported using wifi-based strain sensors under static and impact load in non-destructive measurement, used for long periods and can real-time monitorize.",

author = "Vega Aditama and Dewi, \{Sri Murni\} and Ari Wibowo and Wijaya, \{Ming Narto\}",

note = "Publisher Copyright: {\textcopyright} 2024 Author(s).; 2022 Transdisciplinary Symposium on Engineering and Technology: Development of Digital and Green Technology on Post Pandemic Era, TSET 2022 ; Conference date: 21-09-2022",

year = "2024",

month = jul,

day = "12",

doi = "10.1063/5.0202079",

language = "English",

volume = "3077",

journal = "AIP Conference Proceedings",

issn = "0094-243X",

publisher = "American Institute of Physics",

number = "1",

}

TY - JOUR

T1 - Real-time structural health monitoring (SHM) using strain gauge Arduino sensor at reinfocement concrete under static and impact loading

AU - Aditama, Vega

AU - Dewi, Sri Murni

AU - Wibowo, Ari

AU - Wijaya, Ming Narto

PY - 2024/7/12

Y1 - 2024/7/12

N2 - The Strong and safe Building is designed to avoid structural failure from an earthquake or the other causes. Internet of Things (IoT) based real-time wireless sensors were used in BF 350 AA Arduino module to measure the strain of reinforcement and concrete of structural member in the building. The collapse of the structure can be detected and the weakening of the building structure through reinforcement and concrete can be reported using wifi-based strain sensors under static and impact load in non-destructive measurement, used for long periods and can real-time monitorize.

AB - The Strong and safe Building is designed to avoid structural failure from an earthquake or the other causes. Internet of Things (IoT) based real-time wireless sensors were used in BF 350 AA Arduino module to measure the strain of reinforcement and concrete of structural member in the building. The collapse of the structure can be detected and the weakening of the building structure through reinforcement and concrete can be reported using wifi-based strain sensors under static and impact load in non-destructive measurement, used for long periods and can real-time monitorize.

UR - https://www.scopus.com/pages/publications/85199044162

U2 - 10.1063/5.0202079

DO - 10.1063/5.0202079

M3 - Conference article

AN - SCOPUS:85199044162

SN - 0094-243X

VL - 3077

JO - AIP Conference Proceedings

JF - AIP Conference Proceedings

IS - 1

M1 - 050046

T2 - 2022 Transdisciplinary Symposium on Engineering and Technology: Development of Digital and Green Technology on Post Pandemic Era, TSET 2022

Y2 - 21 September 2022

ER -

Real-time structural health monitoring (SHM) using strain gauge Arduino sensor at reinfocement concrete under static and impact loading

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this