Portable Heart Beat Monitoring System Using Three-Lead Configuration

Zainul Abidin; Ponco Siwindarto; Adharul Muttaqin; Muhammad Azril Muttaqin

doi:10.1109/EECCIS.2018.8692840

Portable Heart Beat Monitoring System Using Three-Lead Configuration

Zainul Abidin
, Ponco Siwindarto
, Adharul Muttaqin
, Muhammad Azril Muttaqin

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

7 Citations (Scopus)

Abstract

Electrocardiogram (ECG) signal is useful for heart beat monitoring. Portable heart beat monitoring system is required by patient who have to move to another room to take other examination at the same time. The system was realized by using analog front-end signal processing block (AD8232), active filter, micro controller Arduino nano, and wireless communication device (nRF24L01) with three-lead configuration. Experiment result confirms the wireless communication device can transfer data with maximum distance of 80m. Furthermore, among three ECG waveforms produced by the system, the ECG waveform of Lead II is the closest one with normal ECG waveform. It confirms that the commonly used three-lead configuration is the Lead II.

Original language	English
Title of host publication	2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	173-176
Number of pages	4
ISBN (Electronic)	9781538652510
DOIs	https://doi.org/10.1109/EECCIS.2018.8692840
Publication status	Published - 2 Jul 2018
Event	2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018 - Batu, East Java, Indonesia Duration: 9 Oct 2018 → 11 Oct 2018

Publication series

Name	2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018

Conference

Conference	2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018
Country/Territory	Indonesia
City	Batu, East Java
Period	9/10/18 → 11/10/18

Keywords

Electrocardiogram
heart beat
portable
three-lead configuration
wireless communication

Access to Document

10.1109/EECCIS.2018.8692840

Cite this

Abidin, Z., Siwindarto, P., Muttaqin, A., & Muttaqin, M. A. (2018). Portable Heart Beat Monitoring System Using Three-Lead Configuration. In 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018 (pp. 173-176). Article 8692840 (2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EECCIS.2018.8692840

Abidin, Zainul ; Siwindarto, Ponco ; Muttaqin, Adharul et al. / Portable Heart Beat Monitoring System Using Three-Lead Configuration. 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 173-176 (2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018).

@inproceedings{515949f5814b455f9ef606b980fb36ad,

title = "Portable Heart Beat Monitoring System Using Three-Lead Configuration",

abstract = "Electrocardiogram (ECG) signal is useful for heart beat monitoring. Portable heart beat monitoring system is required by patient who have to move to another room to take other examination at the same time. The system was realized by using analog front-end signal processing block (AD8232), active filter, micro controller Arduino nano, and wireless communication device (nRF24L01) with three-lead configuration. Experiment result confirms the wireless communication device can transfer data with maximum distance of 80m. Furthermore, among three ECG waveforms produced by the system, the ECG waveform of Lead II is the closest one with normal ECG waveform. It confirms that the commonly used three-lead configuration is the Lead II.",

keywords = "Electrocardiogram, heart beat, portable, three-lead configuration, wireless communication",

author = "Zainul Abidin and Ponco Siwindarto and Adharul Muttaqin and Muttaqin, \{Muhammad Azril\}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018 ; Conference date: 09-10-2018 Through 11-10-2018",

year = "2018",

month = jul,

day = "2",

doi = "10.1109/EECCIS.2018.8692840",

language = "English",

series = "2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "173--176",

booktitle = "2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018",

}

Abidin, Z, Siwindarto, P, Muttaqin, A & Muttaqin, MA 2018, Portable Heart Beat Monitoring System Using Three-Lead Configuration. in 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018., 8692840, 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018, Institute of Electrical and Electronics Engineers Inc., pp. 173-176, 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018, Batu, East Java, Indonesia, 9/10/18. https://doi.org/10.1109/EECCIS.2018.8692840

Portable Heart Beat Monitoring System Using Three-Lead Configuration. / Abidin, Zainul; Siwindarto, Ponco; Muttaqin, Adharul et al.
2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 173-176 8692840 (2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Portable Heart Beat Monitoring System Using Three-Lead Configuration

AU - Abidin, Zainul

AU - Siwindarto, Ponco

AU - Muttaqin, Adharul

AU - Muttaqin, Muhammad Azril

PY - 2018/7/2

Y1 - 2018/7/2

N2 - Electrocardiogram (ECG) signal is useful for heart beat monitoring. Portable heart beat monitoring system is required by patient who have to move to another room to take other examination at the same time. The system was realized by using analog front-end signal processing block (AD8232), active filter, micro controller Arduino nano, and wireless communication device (nRF24L01) with three-lead configuration. Experiment result confirms the wireless communication device can transfer data with maximum distance of 80m. Furthermore, among three ECG waveforms produced by the system, the ECG waveform of Lead II is the closest one with normal ECG waveform. It confirms that the commonly used three-lead configuration is the Lead II.

AB - Electrocardiogram (ECG) signal is useful for heart beat monitoring. Portable heart beat monitoring system is required by patient who have to move to another room to take other examination at the same time. The system was realized by using analog front-end signal processing block (AD8232), active filter, micro controller Arduino nano, and wireless communication device (nRF24L01) with three-lead configuration. Experiment result confirms the wireless communication device can transfer data with maximum distance of 80m. Furthermore, among three ECG waveforms produced by the system, the ECG waveform of Lead II is the closest one with normal ECG waveform. It confirms that the commonly used three-lead configuration is the Lead II.

KW - Electrocardiogram

KW - heart beat

KW - portable

KW - three-lead configuration

KW - wireless communication

UR - https://www.scopus.com/pages/publications/85065086682

U2 - 10.1109/EECCIS.2018.8692840

DO - 10.1109/EECCIS.2018.8692840

M3 - Conference contribution

AN - SCOPUS:85065086682

T3 - 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018

SP - 173

EP - 176

BT - 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018

Y2 - 9 October 2018 through 11 October 2018

ER -

Abidin Z, Siwindarto P, Muttaqin A, Muttaqin MA. Portable Heart Beat Monitoring System Using Three-Lead Configuration. In 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 173-176. 8692840. (2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar, EECCIS 2018). doi: 10.1109/EECCIS.2018.8692840

Portable Heart Beat Monitoring System Using Three-Lead Configuration

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this