Multiple-input Single-output Boost Converter

T. Taufik; J. W. Baltierrez; R. N. Hasanah

doi:10.1145/3362752.3362769

Multiple-input Single-output Boost Converter

T. Taufik
, J. W. Baltierrez
, R. N. Hasanah

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper presents a multiple-input single-output converter for the DC House project. The proposed architecture allows for multiple different input sources to supply power to a single higher-power output. The design uses a boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively to optimize the system. This approach is also desirable since it allows for flexibility in multiple configurations. The design was tested using hardware and data results show the performance met and exceeded the needs of the DC House project. Data were taken for configuration with 1, 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.

Original language	English
Title of host publication	Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019
Publisher	Association for Computing Machinery
Pages	7-12
Number of pages	6
ISBN (Electronic)	9781450372145
DOIs	https://doi.org/10.1145/3362752.3362769
Publication status	Published - 25 Sept 2019
Event	2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 and its Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019 - Penang, Malaysia Duration: 25 Sept 2019 → 27 Sept 2019

Publication series

Name	ACM International Conference Proceeding Series

Conference

Conference	2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 and its Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019
Country/Territory	Malaysia
City	Penang
Period	25/09/19 → 27/09/19

Keywords

Boost Converter
DC House project
MISO converter

Access to Document

10.1145/3362752.3362769

Cite this

Taufik, T., Baltierrez, J. W., & Hasanah, R. N. (2019). Multiple-input Single-output Boost Converter. In Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019 (pp. 7-12). (ACM International Conference Proceeding Series). Association for Computing Machinery. https://doi.org/10.1145/3362752.3362769

Taufik, T. ; Baltierrez, J. W. ; Hasanah, R. N. / Multiple-input Single-output Boost Converter. Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, 2019. pp. 7-12 (ACM International Conference Proceeding Series).

@inproceedings{039128932ec54208a2bcce772e20098a,

title = "Multiple-input Single-output Boost Converter",

abstract = "This paper presents a multiple-input single-output converter for the DC House project. The proposed architecture allows for multiple different input sources to supply power to a single higher-power output. The design uses a boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively to optimize the system. This approach is also desirable since it allows for flexibility in multiple configurations. The design was tested using hardware and data results show the performance met and exceeded the needs of the DC House project. Data were taken for configuration with 1, 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92\%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.",

keywords = "Boost Converter, DC House project, MISO converter",

author = "T. Taufik and Baltierrez, \{J. W.\} and Hasanah, \{R. N.\}",

note = "Publisher Copyright: {\textcopyright} 2019 Association for Computing Machinery.; 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 and its Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019 ; Conference date: 25-09-2019 Through 27-09-2019",

year = "2019",

month = sep,

day = "25",

doi = "10.1145/3362752.3362769",

language = "English",

series = "ACM International Conference Proceeding Series",

publisher = "Association for Computing Machinery",

pages = "7--12",

booktitle = "Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019",

}

Taufik, T, Baltierrez, JW & Hasanah, RN 2019, Multiple-input Single-output Boost Converter. in Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. ACM International Conference Proceeding Series, Association for Computing Machinery, pp. 7-12, 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 and its Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019, Penang, Malaysia, 25/09/19. https://doi.org/10.1145/3362752.3362769

Multiple-input Single-output Boost Converter. / Taufik, T.; Baltierrez, J. W.; Hasanah, R. N.
Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, 2019. p. 7-12 (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Multiple-input Single-output Boost Converter

AU - Taufik, T.

AU - Baltierrez, J. W.

AU - Hasanah, R. N.

PY - 2019/9/25

Y1 - 2019/9/25

N2 - This paper presents a multiple-input single-output converter for the DC House project. The proposed architecture allows for multiple different input sources to supply power to a single higher-power output. The design uses a boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively to optimize the system. This approach is also desirable since it allows for flexibility in multiple configurations. The design was tested using hardware and data results show the performance met and exceeded the needs of the DC House project. Data were taken for configuration with 1, 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.

AB - This paper presents a multiple-input single-output converter for the DC House project. The proposed architecture allows for multiple different input sources to supply power to a single higher-power output. The design uses a boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively to optimize the system. This approach is also desirable since it allows for flexibility in multiple configurations. The design was tested using hardware and data results show the performance met and exceeded the needs of the DC House project. Data were taken for configuration with 1, 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.

KW - Boost Converter

KW - DC House project

KW - MISO converter

UR - https://www.scopus.com/pages/publications/85077721337

U2 - 10.1145/3362752.3362769

DO - 10.1145/3362752.3362769

M3 - Conference contribution

AN - SCOPUS:85077721337

T3 - ACM International Conference Proceeding Series

SP - 7

EP - 12

BT - Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019

PB - Association for Computing Machinery

T2 - 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 and its Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019

Y2 - 25 September 2019 through 27 September 2019

ER -

Taufik T, Baltierrez JW, Hasanah RN. Multiple-input Single-output Boost Converter. In Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery. 2019. p. 7-12. (ACM International Conference Proceeding Series). doi: 10.1145/3362752.3362769

Multiple-input Single-output Boost Converter

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this