Microstructure and hardness of gray cast iron as a product of solidification in permanent mold

Agus Yulianto; Rudy Soenoko; Wahyono Suprapto; As’Ad Sonief; Agung Setyo Darmawan; Muhammad Debi Setiawan

doi:10.4028/www.scientific.net/MSF.991.37

Microstructure and hardness of gray cast iron as a product of solidification in permanent mold

Agus Yulianto
, Rudy Soenoko
, Wahyono Suprapto
, As’Ad Sonief
, Agung Setyo Darmawan^*
, Muhammad Debi Setiawan

^*Corresponding author for this work

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

Abstract

Molds of metal are widely used in the casting process. The cooling rate in solidification of castings product with metal molds on the outer side and inner side is different. Therefore, sizes and types of phase will be also different. This study aims to investigate the microstructure and hardness of gray cast iron. To realize this research, the gray cast iron melting process was carried out in an induction furnace. Melted gray cast iron was poured into a Ferro Casting Ductile mold that has been through a preheating process at a temperature of 300^o C. The gray cast iron is then tested for composition, microstructure and hardness. The test results show that the part containing more cementite phase will be harder.

Original language	English
Title of host publication	Advanced Materials Science II
Editors	Waluyo Adi Siswanto, Tri Widodo Besar Riyadi
Publisher	Trans Tech Publications Ltd
Pages	37-43
Number of pages	7
ISBN (Print)	9783035717037
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.991.37
Publication status	Published - 2020
Event	2nd International Conference on Advanced Materials Science, ICOAMS 2019 - Surakarta, Indonesia Duration: 23 Oct 2019 → 24 Oct 2019

Publication series

Name	Materials Science Forum
Volume	991 MSF
ISSN (Print)	0255-5476
ISSN (Electronic)	1662-9752

Conference

Conference	2nd International Conference on Advanced Materials Science, ICOAMS 2019
Country/Territory	Indonesia
City	Surakarta
Period	23/10/19 → 24/10/19

Keywords

Ferro Casting Ductile
Hardness
Microstructure
Solidification
Spectrometer

Access to Document

10.4028/www.scientific.net/MSF.991.37

Cite this

Yulianto, A., Soenoko, R., Suprapto, W., Sonief, AA., Darmawan, A. S., & Setiawan, M. D. (2020). Microstructure and hardness of gray cast iron as a product of solidification in permanent mold. In W. A. Siswanto, & T. W. B. Riyadi (Eds.), Advanced Materials Science II (pp. 37-43). (Materials Science Forum; Vol. 991 MSF). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.991.37

@inproceedings{6148ab3db6a14e58a0052481d899bc24,

title = "Microstructure and hardness of gray cast iron as a product of solidification in permanent mold",

abstract = "Molds of metal are widely used in the casting process. The cooling rate in solidification of castings product with metal molds on the outer side and inner side is different. Therefore, sizes and types of phase will be also different. This study aims to investigate the microstructure and hardness of gray cast iron. To realize this research, the gray cast iron melting process was carried out in an induction furnace. Melted gray cast iron was poured into a Ferro Casting Ductile mold that has been through a preheating process at a temperature of 300o C. The gray cast iron is then tested for composition, microstructure and hardness. The test results show that the part containing more cementite phase will be harder.",

keywords = "Ferro Casting Ductile, Hardness, Microstructure, Solidification, Spectrometer",

author = "Agus Yulianto and Rudy Soenoko and Wahyono Suprapto and As{\textquoteright}Ad Sonief and Darmawan, \{Agung Setyo\} and Setiawan, \{Muhammad Debi\}",

note = "Publisher Copyright: {\textcopyright} 2020 Trans Tech Publications Ltd, Switzerland.; 2nd International Conference on Advanced Materials Science, ICOAMS 2019 ; Conference date: 23-10-2019 Through 24-10-2019",

year = "2020",

doi = "10.4028/www.scientific.net/MSF.991.37",

language = "English",

isbn = "9783035717037",

series = "Materials Science Forum",

publisher = "Trans Tech Publications Ltd",

pages = "37--43",

editor = "Siswanto, \{Waluyo Adi\} and Riyadi, \{Tri Widodo Besar\}",

booktitle = "Advanced Materials Science II",

}

Yulianto, A, Soenoko, R, Suprapto, W, Sonief, AA, Darmawan, AS & Setiawan, MD 2020, Microstructure and hardness of gray cast iron as a product of solidification in permanent mold. in WA Siswanto & TWB Riyadi (eds), Advanced Materials Science II. Materials Science Forum, vol. 991 MSF, Trans Tech Publications Ltd, pp. 37-43, 2nd International Conference on Advanced Materials Science, ICOAMS 2019, Surakarta, Indonesia, 23/10/19. https://doi.org/10.4028/www.scientific.net/MSF.991.37

Microstructure and hardness of gray cast iron as a product of solidification in permanent mold. / Yulianto, Agus; Soenoko, Rudy; Suprapto, Wahyono et al.
Advanced Materials Science II. ed. / Waluyo Adi Siswanto; Tri Widodo Besar Riyadi. Trans Tech Publications Ltd, 2020. p. 37-43 (Materials Science Forum; Vol. 991 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Microstructure and hardness of gray cast iron as a product of solidification in permanent mold

AU - Yulianto, Agus

AU - Soenoko, Rudy

AU - Suprapto, Wahyono

AU - Sonief, As’Ad

AU - Darmawan, Agung Setyo

AU - Setiawan, Muhammad Debi

PY - 2020

Y1 - 2020

N2 - Molds of metal are widely used in the casting process. The cooling rate in solidification of castings product with metal molds on the outer side and inner side is different. Therefore, sizes and types of phase will be also different. This study aims to investigate the microstructure and hardness of gray cast iron. To realize this research, the gray cast iron melting process was carried out in an induction furnace. Melted gray cast iron was poured into a Ferro Casting Ductile mold that has been through a preheating process at a temperature of 300o C. The gray cast iron is then tested for composition, microstructure and hardness. The test results show that the part containing more cementite phase will be harder.

AB - Molds of metal are widely used in the casting process. The cooling rate in solidification of castings product with metal molds on the outer side and inner side is different. Therefore, sizes and types of phase will be also different. This study aims to investigate the microstructure and hardness of gray cast iron. To realize this research, the gray cast iron melting process was carried out in an induction furnace. Melted gray cast iron was poured into a Ferro Casting Ductile mold that has been through a preheating process at a temperature of 300o C. The gray cast iron is then tested for composition, microstructure and hardness. The test results show that the part containing more cementite phase will be harder.

KW - Ferro Casting Ductile

KW - Hardness

KW - Microstructure

KW - Solidification

KW - Spectrometer

UR - https://www.scopus.com/pages/publications/85087023597

U2 - 10.4028/www.scientific.net/MSF.991.37

DO - 10.4028/www.scientific.net/MSF.991.37

M3 - Conference contribution

AN - SCOPUS:85087023597

SN - 9783035717037

T3 - Materials Science Forum

SP - 37

EP - 43

BT - Advanced Materials Science II

A2 - Siswanto, Waluyo Adi

A2 - Riyadi, Tri Widodo Besar

PB - Trans Tech Publications Ltd

T2 - 2nd International Conference on Advanced Materials Science, ICOAMS 2019

Y2 - 23 October 2019 through 24 October 2019

ER -

Microstructure and hardness of gray cast iron as a product of solidification in permanent mold

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this