Low temperature plasma nitriding of austenitic stainless steel

D. J. Santjojo

doi:10.1063/1.5046286

Low temperature plasma nitriding of austenitic stainless steel

Istiroyah^*
, D. J. Santjojo

^*Corresponding author for this work

Faculty of Mathematics and Natural Sciences

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Austenitic Stainless Steel - ASS has excellent corrosion resistance. Therefore, it plays an important role in many industrial and manufacturing sector. However, its application was limited by its low hardness and wear resistant behavior. Low temperature plasma nitriding is one of appropriate surface treatment techniques for improving its properties. In this paper, plasma nitriding of austenitic stainless steel was carried out using by high dense RF-DC plasma nitriding. Nitriding temperature hold at 400°C, whereas nitriding athmosphere was a gas mixture of 70% N₂: 30% H₂. Nitriding times was varied for 7.2, 1.44 and 28.8 ks. Nitrided specimens were investigated through micro-hardness measurement and X-ray diffraction analysis.

Original language	English
Title of host publication	Disruptive Innovation in Mechanical Engineering for Industry Competitiveness
Subtitle of host publication	Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017
Editors	Vivien S. Djanali, Suwarno, Bambang Pramujati, Volodymyr A. Yartys
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735416994
DOIs	https://doi.org/10.1063/1.5046286
Publication status	Published - 13 Jul 2018
Event	3rd International Conference on Mechanical Engineering, ICOME 2017 - Surabaya, Indonesia Duration: 5 Oct 2017 → 6 Oct 2017

Publication series

Name	AIP Conference Proceedings
Volume	1983
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	3rd International Conference on Mechanical Engineering, ICOME 2017
Country/Territory	Indonesia
City	Surabaya
Period	5/10/17 → 6/10/17

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1063/1.5046286

Cite this

Istiroyah , & Santjojo, D. J. (2018). Low temperature plasma nitriding of austenitic stainless steel. In V. S. Djanali, Suwarno, B. Pramujati, & V. A. Yartys (Eds.), Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017 Article 050013 (AIP Conference Proceedings; Vol. 1983). American Institute of Physics Inc.. https://doi.org/10.1063/1.5046286

Istiroyah, ; Santjojo, D. J. / Low temperature plasma nitriding of austenitic stainless steel. Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. editor / Vivien S. Djanali ; Suwarno ; Bambang Pramujati ; Volodymyr A. Yartys. American Institute of Physics Inc., 2018. (AIP Conference Proceedings).

@inproceedings{542eeb895a954ca89a346f9615d9c8bc,

title = "Low temperature plasma nitriding of austenitic stainless steel",

abstract = "Austenitic Stainless Steel - ASS has excellent corrosion resistance. Therefore, it plays an important role in many industrial and manufacturing sector. However, its application was limited by its low hardness and wear resistant behavior. Low temperature plasma nitriding is one of appropriate surface treatment techniques for improving its properties. In this paper, plasma nitriding of austenitic stainless steel was carried out using by high dense RF-DC plasma nitriding. Nitriding temperature hold at 400°C, whereas nitriding athmosphere was a gas mixture of 70\% N2: 30\% H2. Nitriding times was varied for 7.2, 1.44 and 28.8 ks. Nitrided specimens were investigated through micro-hardness measurement and X-ray diffraction analysis.",

author = "Istiroyah and Santjojo, \{D. J.\}",

note = "Publisher Copyright: {\textcopyright} 2018 Author(s).; 3rd International Conference on Mechanical Engineering, ICOME 2017 ; Conference date: 05-10-2017 Through 06-10-2017",

year = "2018",

month = jul,

day = "13",

doi = "10.1063/1.5046286",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Djanali, \{Vivien S.\} and Suwarno and Bambang Pramujati and Yartys, \{Volodymyr A.\}",

booktitle = "Disruptive Innovation in Mechanical Engineering for Industry Competitiveness",

}

Istiroyah, & Santjojo, DJ 2018, Low temperature plasma nitriding of austenitic stainless steel. in VS Djanali, Suwarno, B Pramujati & VA Yartys (eds), Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017., 050013, AIP Conference Proceedings, vol. 1983, American Institute of Physics Inc., 3rd International Conference on Mechanical Engineering, ICOME 2017, Surabaya, Indonesia, 5/10/17. https://doi.org/10.1063/1.5046286

Low temperature plasma nitriding of austenitic stainless steel. / Istiroyah, ; Santjojo, D. J.
Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. ed. / Vivien S. Djanali; Suwarno; Bambang Pramujati; Volodymyr A. Yartys. American Institute of Physics Inc., 2018. 050013 (AIP Conference Proceedings; Vol. 1983).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Low temperature plasma nitriding of austenitic stainless steel

AU - Istiroyah,

AU - Santjojo, D. J.

PY - 2018/7/13

Y1 - 2018/7/13

N2 - Austenitic Stainless Steel - ASS has excellent corrosion resistance. Therefore, it plays an important role in many industrial and manufacturing sector. However, its application was limited by its low hardness and wear resistant behavior. Low temperature plasma nitriding is one of appropriate surface treatment techniques for improving its properties. In this paper, plasma nitriding of austenitic stainless steel was carried out using by high dense RF-DC plasma nitriding. Nitriding temperature hold at 400°C, whereas nitriding athmosphere was a gas mixture of 70% N2: 30% H2. Nitriding times was varied for 7.2, 1.44 and 28.8 ks. Nitrided specimens were investigated through micro-hardness measurement and X-ray diffraction analysis.

AB - Austenitic Stainless Steel - ASS has excellent corrosion resistance. Therefore, it plays an important role in many industrial and manufacturing sector. However, its application was limited by its low hardness and wear resistant behavior. Low temperature plasma nitriding is one of appropriate surface treatment techniques for improving its properties. In this paper, plasma nitriding of austenitic stainless steel was carried out using by high dense RF-DC plasma nitriding. Nitriding temperature hold at 400°C, whereas nitriding athmosphere was a gas mixture of 70% N2: 30% H2. Nitriding times was varied for 7.2, 1.44 and 28.8 ks. Nitrided specimens were investigated through micro-hardness measurement and X-ray diffraction analysis.

UR - https://www.scopus.com/pages/publications/85050510034

U2 - 10.1063/1.5046286

DO - 10.1063/1.5046286

M3 - Conference contribution

AN - SCOPUS:85050510034

T3 - AIP Conference Proceedings

BT - Disruptive Innovation in Mechanical Engineering for Industry Competitiveness

A2 - Djanali, Vivien S.

A2 - Suwarno, null

A2 - Pramujati, Bambang

A2 - Yartys, Volodymyr A.

PB - American Institute of Physics Inc.

T2 - 3rd International Conference on Mechanical Engineering, ICOME 2017

Y2 - 5 October 2017 through 6 October 2017

ER -

Istiroyah , Santjojo DJ. Low temperature plasma nitriding of austenitic stainless steel. In Djanali VS, Suwarno, Pramujati B, Yartys VA, editors, Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. American Institute of Physics Inc. 2018. 050013. (AIP Conference Proceedings). doi: 10.1063/1.5046286

Low temperature plasma nitriding of austenitic stainless steel

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this