Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions

You Wei Chang; Ramadhani Kurniawan Subroto; Kuo Lung Lian; Bwo Ren Ke

doi:10.1109/ICPS48389.2020.9176760

Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions

You Wei Chang
, Ramadhani Kurniawan Subroto
, Kuo Lung Lian
, Bwo Ren Ke

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

The cost of installing solar panels has been greatly reduced nowadays, so the advantages of solar energy are one of the reasons to energy transformation from coal-fired power to renewable energy. There are three materials of widely used modern solar panels: monocrystalline, polycrystalline, and amorphous. In this paper, we have constructed the one diode models (ODM) of these three different materials in order to find their I-V characteristic curves under uniform or partial shading conditions (PSCs). We have demonstrated that a maximum power point (MPP) tracker, under the same PSCs spends less time and has better tracking efficiency in tracking the MPP of a solar panel, made of amorphous material, because this type of solar panel has the lowest curvature value compared to the monocrystalline and the polycrystalline panels. Two different maximum power point tracking (MPPT) algorithms, such as particle swarm optimization (PSO) and simulated annealing (SA), are used to validate this finding.

Original language	English
Title of host publication	2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728171951
DOIs	https://doi.org/10.1109/ICPS48389.2020.9176760
Publication status	Published - Jun 2020
Externally published	Yes
Event	56th IEEE/IAS Industrial and Commercial Power Systems Technical Conference, I and CPS 2020 - Las Vegas, United States Duration: 29 Jun 2020 → …

Publication series

Name	Conference Record - Industrial and Commercial Power Systems Technical Conference
Volume	2020-June

Conference

Conference	56th IEEE/IAS Industrial and Commercial Power Systems Technical Conference, I and CPS 2020
Country/Territory	United States
City	Las Vegas
Period	29/06/20 → …

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

curvature
ideality factor
maximum power point tracking (MPPT)
One diode models (ODM)
partial shading Condition (PSC)

Access to Document

10.1109/ICPS48389.2020.9176760

Cite this

Chang, Y. W., Subroto, R. K., Lian, K. L., & Ke, B. R. (2020). Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions. In 2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020 Article 9176760 (Conference Record - Industrial and Commercial Power Systems Technical Conference; Vol. 2020-June). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICPS48389.2020.9176760

Chang, You Wei ; Subroto, Ramadhani Kurniawan ; Lian, Kuo Lung et al. / Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions. 2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020. Institute of Electrical and Electronics Engineers Inc., 2020. (Conference Record - Industrial and Commercial Power Systems Technical Conference).

@inproceedings{af01b0c82d9448c69e6e60cd81803cbd,

title = "Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions",

abstract = "The cost of installing solar panels has been greatly reduced nowadays, so the advantages of solar energy are one of the reasons to energy transformation from coal-fired power to renewable energy. There are three materials of widely used modern solar panels: monocrystalline, polycrystalline, and amorphous. In this paper, we have constructed the one diode models (ODM) of these three different materials in order to find their I-V characteristic curves under uniform or partial shading conditions (PSCs). We have demonstrated that a maximum power point (MPP) tracker, under the same PSCs spends less time and has better tracking efficiency in tracking the MPP of a solar panel, made of amorphous material, because this type of solar panel has the lowest curvature value compared to the monocrystalline and the polycrystalline panels. Two different maximum power point tracking (MPPT) algorithms, such as particle swarm optimization (PSO) and simulated annealing (SA), are used to validate this finding.",

keywords = "curvature, ideality factor, maximum power point tracking (MPPT), One diode models (ODM), partial shading Condition (PSC)",

author = "Chang, \{You Wei\} and Subroto, \{Ramadhani Kurniawan\} and Lian, \{Kuo Lung\} and Ke, \{Bwo Ren\}",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 56th IEEE/IAS Industrial and Commercial Power Systems Technical Conference, I and CPS 2020 ; Conference date: 29-06-2020",

year = "2020",

month = jun,

doi = "10.1109/ICPS48389.2020.9176760",

language = "English",

series = "Conference Record - Industrial and Commercial Power Systems Technical Conference",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020",

}

Chang, YW, Subroto, RK, Lian, KL & Ke, BR 2020, Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions. in 2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020., 9176760, Conference Record - Industrial and Commercial Power Systems Technical Conference, vol. 2020-June, Institute of Electrical and Electronics Engineers Inc., 56th IEEE/IAS Industrial and Commercial Power Systems Technical Conference, I and CPS 2020, Las Vegas, United States, 29/06/20. https://doi.org/10.1109/ICPS48389.2020.9176760

Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions. / Chang, You Wei; Subroto, Ramadhani Kurniawan; Lian, Kuo Lung et al.
2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 9176760 (Conference Record - Industrial and Commercial Power Systems Technical Conference; Vol. 2020-June).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions

AU - Chang, You Wei

AU - Subroto, Ramadhani Kurniawan

AU - Lian, Kuo Lung

AU - Ke, Bwo Ren

PY - 2020/6

Y1 - 2020/6

N2 - The cost of installing solar panels has been greatly reduced nowadays, so the advantages of solar energy are one of the reasons to energy transformation from coal-fired power to renewable energy. There are three materials of widely used modern solar panels: monocrystalline, polycrystalline, and amorphous. In this paper, we have constructed the one diode models (ODM) of these three different materials in order to find their I-V characteristic curves under uniform or partial shading conditions (PSCs). We have demonstrated that a maximum power point (MPP) tracker, under the same PSCs spends less time and has better tracking efficiency in tracking the MPP of a solar panel, made of amorphous material, because this type of solar panel has the lowest curvature value compared to the monocrystalline and the polycrystalline panels. Two different maximum power point tracking (MPPT) algorithms, such as particle swarm optimization (PSO) and simulated annealing (SA), are used to validate this finding.

AB - The cost of installing solar panels has been greatly reduced nowadays, so the advantages of solar energy are one of the reasons to energy transformation from coal-fired power to renewable energy. There are three materials of widely used modern solar panels: monocrystalline, polycrystalline, and amorphous. In this paper, we have constructed the one diode models (ODM) of these three different materials in order to find their I-V characteristic curves under uniform or partial shading conditions (PSCs). We have demonstrated that a maximum power point (MPP) tracker, under the same PSCs spends less time and has better tracking efficiency in tracking the MPP of a solar panel, made of amorphous material, because this type of solar panel has the lowest curvature value compared to the monocrystalline and the polycrystalline panels. Two different maximum power point tracking (MPPT) algorithms, such as particle swarm optimization (PSO) and simulated annealing (SA), are used to validate this finding.

KW - curvature

KW - ideality factor

KW - maximum power point tracking (MPPT)

KW - One diode models (ODM)

KW - partial shading Condition (PSC)

UR - https://www.scopus.com/pages/publications/85090854515

U2 - 10.1109/ICPS48389.2020.9176760

DO - 10.1109/ICPS48389.2020.9176760

M3 - Conference contribution

AN - SCOPUS:85090854515

T3 - Conference Record - Industrial and Commercial Power Systems Technical Conference

BT - 2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 56th IEEE/IAS Industrial and Commercial Power Systems Technical Conference, I and CPS 2020

Y2 - 29 June 2020

ER -

Chang YW, Subroto RK, Lian KL, Ke BR. Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions. In 2020 IEEE/IAS 56th Industrial and Commercial Power Systems Technical Conference, I and CPS 2020. Institute of Electrical and Electronics Engineers Inc. 2020. 9176760. (Conference Record - Industrial and Commercial Power Systems Technical Conference). doi: 10.1109/ICPS48389.2020.9176760

Investigation of Maximum Power Point Tracking of Different Kinds of Solar Panels under Partial Shading Conditions

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this