FTIR analysis of polyethylene glycol treated bacterial cellulose pellicle

J. Maulana; H. Suryanto; B. D. Susilo; U. Yanuhar; A. Aminnudin; Y. R.A. Pradana; R. D. Bintara

doi:10.1088/1755-1315/847/1/012007

FTIR analysis of polyethylene glycol treated bacterial cellulose pellicle

J. Maulana
, H. Suryanto^*
, B. D. Susilo
, U. Yanuhar
, A. Aminnudin
, Y. R.A. Pradana
, R. D. Bintara

^*Corresponding author for this work

Faculty of Fisheries and Marine Sciences

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

Abstract

Abstrak. This research identified the effect of additional polyethylene glycol (PEG) in bacterial cellulose made from pineapple peel waste. The produced pellicles were soaked in PEG solution with 0%, 1%, 2.5%, and 5%. Then, they were homogenised using an ultrasonic homogeniser for 15 minutes before dried using the freeze-drying method. The functional groups were observed using FTIR. The functional groups showed the presence of cellulose I and cellulose II at 439.08 cm-1, 2895.15 cm-1, 1963.53 cm-1 1633.71 cm-1, 1315.45 cm-1, 839.03 cm-1 wavenumbers. Additional PEG caused an increase of the C-H bond at 1963.53 cm-1 wave number.

Original language	English
Article number	012007
Journal	IOP Conference Series: Earth and Environmental Science
Volume	847
Issue number	1
DOIs	https://doi.org/10.1088/1755-1315/847/1/012007
Publication status	Published - 7 Sept 2021
Event	3rd International Conference on Green Civil and Environmental Engineering, GCEE 2021 - East Java, Virtual, Indonesia Duration: 12 Aug 2021 → …

Access to Document

10.1088/1755-1315/847/1/012007

Cite this

@article{ef562303d1be4ca89c4f744a4ab09e11,

title = "FTIR analysis of polyethylene glycol treated bacterial cellulose pellicle",

abstract = "Abstrak. This research identified the effect of additional polyethylene glycol (PEG) in bacterial cellulose made from pineapple peel waste. The produced pellicles were soaked in PEG solution with 0\%, 1\%, 2.5\%, and 5\%. Then, they were homogenised using an ultrasonic homogeniser for 15 minutes before dried using the freeze-drying method. The functional groups were observed using FTIR. The functional groups showed the presence of cellulose I and cellulose II at 439.08 cm-1, 2895.15 cm-1, 1963.53 cm-1 1633.71 cm-1, 1315.45 cm-1, 839.03 cm-1 wavenumbers. Additional PEG caused an increase of the C-H bond at 1963.53 cm-1 wave number.",

author = "J. Maulana and H. Suryanto and Susilo, \{B. D.\} and U. Yanuhar and A. Aminnudin and Pradana, \{Y. R.A.\} and Bintara, \{R. D.\}",

note = "Publisher Copyright: {\textcopyright} Published under licence by IOP Publishing Ltd.; 3rd International Conference on Green Civil and Environmental Engineering, GCEE 2021 ; Conference date: 12-08-2021",

year = "2021",

month = sep,

day = "7",

doi = "10.1088/1755-1315/847/1/012007",

language = "English",

volume = "847",

journal = "IOP Conference Series: Earth and Environmental Science",

issn = "1755-1307",

publisher = "Institute of Physics",

number = "1",

}

TY - JOUR

T1 - FTIR analysis of polyethylene glycol treated bacterial cellulose pellicle

AU - Maulana, J.

AU - Suryanto, H.

AU - Susilo, B. D.

AU - Yanuhar, U.

AU - Aminnudin, A.

AU - Pradana, Y. R.A.

AU - Bintara, R. D.

PY - 2021/9/7

Y1 - 2021/9/7

N2 - Abstrak. This research identified the effect of additional polyethylene glycol (PEG) in bacterial cellulose made from pineapple peel waste. The produced pellicles were soaked in PEG solution with 0%, 1%, 2.5%, and 5%. Then, they were homogenised using an ultrasonic homogeniser for 15 minutes before dried using the freeze-drying method. The functional groups were observed using FTIR. The functional groups showed the presence of cellulose I and cellulose II at 439.08 cm-1, 2895.15 cm-1, 1963.53 cm-1 1633.71 cm-1, 1315.45 cm-1, 839.03 cm-1 wavenumbers. Additional PEG caused an increase of the C-H bond at 1963.53 cm-1 wave number.

AB - Abstrak. This research identified the effect of additional polyethylene glycol (PEG) in bacterial cellulose made from pineapple peel waste. The produced pellicles were soaked in PEG solution with 0%, 1%, 2.5%, and 5%. Then, they were homogenised using an ultrasonic homogeniser for 15 minutes before dried using the freeze-drying method. The functional groups were observed using FTIR. The functional groups showed the presence of cellulose I and cellulose II at 439.08 cm-1, 2895.15 cm-1, 1963.53 cm-1 1633.71 cm-1, 1315.45 cm-1, 839.03 cm-1 wavenumbers. Additional PEG caused an increase of the C-H bond at 1963.53 cm-1 wave number.

UR - https://www.scopus.com/pages/publications/85114996278

U2 - 10.1088/1755-1315/847/1/012007

DO - 10.1088/1755-1315/847/1/012007

M3 - Conference article

AN - SCOPUS:85114996278

SN - 1755-1307

VL - 847

JO - IOP Conference Series: Earth and Environmental Science

JF - IOP Conference Series: Earth and Environmental Science

IS - 1

M1 - 012007

T2 - 3rd International Conference on Green Civil and Environmental Engineering, GCEE 2021

Y2 - 12 August 2021

ER -

FTIR analysis of polyethylene glycol treated bacterial cellulose pellicle

Abstract

Access to Document

Other files and links

Fingerprint

Cite this