Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material

Denny Widhiyanuriyawan; Nurcholish Hamidi; Rustan Hatib; Reynolds Widhiyanurrochmansyah

doi:10.1109/ICE3IS59323.2023.10335210

Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material

Denny Widhiyanuriyawan
, Nurcholish Hamidi
, Darjito
, Rustan Hatib
, Reynolds Widhiyanurrochmansyah

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Perovskite solar cells are an attractive type of solar cell for development due to their simplicity of manufacture and competitive efficiency. One of the essential components of PSC fabrication is hole transport material. This study aims to fabricate perovskite solar cells using nickel oxide (NiO) and graphene oxide (GO). The spin coating technique is used in the experiment to know the impact of mixing NiO and GO in perovskite solar cells. The perovskite layer morphology was tested by Scanning Electron Microscope (SEM). The results of this experiment showed that the PSC utilizing NiO/GO material yields a smaller pore size than NiO. In addition, the spin coating process affects the power conversion energy value, with the highest PCE value obtained at 15.3% at 1000 rpm.

Original language	English
Title of host publication	Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System
Subtitle of host publication	Responsible Technology for Sustainable Humanity, ICE3IS 2023
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	37-40
Number of pages	4
ISBN (Electronic)	9798350327762
DOIs	https://doi.org/10.1109/ICE3IS59323.2023.10335210
Publication status	Published - 2023
Event	3rd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2023 - Hybrid, Yogyakarta, Indonesia Duration: 9 Aug 2023 → 10 Aug 2023

Publication series

Name	Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023

Conference

Conference	3rd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2023
Country/Territory	Indonesia
City	Hybrid, Yogyakarta
Period	9/08/23 → 10/08/23

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

graphene oxide (GO)
nickel oxide (NiO)
perovskite solar cell
spin coating

Access to Document

10.1109/ICE3IS59323.2023.10335210

Cite this

Widhiyanuriyawan, D., Hamidi, N., Darjito, Hatib, R., & Widhiyanurrochmansyah, R. (2023). Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. In Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023 (pp. 37-40). (Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICE3IS59323.2023.10335210

Widhiyanuriyawan, Denny ; Hamidi, Nurcholish ; Darjito et al. / Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023. Institute of Electrical and Electronics Engineers Inc., 2023. pp. 37-40 (Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023).

@inproceedings{6be49ec9e79c46159e576d5b4aef2c9d,

title = "Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material",

abstract = "Perovskite solar cells are an attractive type of solar cell for development due to their simplicity of manufacture and competitive efficiency. One of the essential components of PSC fabrication is hole transport material. This study aims to fabricate perovskite solar cells using nickel oxide (NiO) and graphene oxide (GO). The spin coating technique is used in the experiment to know the impact of mixing NiO and GO in perovskite solar cells. The perovskite layer morphology was tested by Scanning Electron Microscope (SEM). The results of this experiment showed that the PSC utilizing NiO/GO material yields a smaller pore size than NiO. In addition, the spin coating process affects the power conversion energy value, with the highest PCE value obtained at 15.3\% at 1000 rpm.",

keywords = "graphene oxide (GO), nickel oxide (NiO), perovskite solar cell, spin coating",

author = "Denny Widhiyanuriyawan and Nurcholish Hamidi and Darjito and Rustan Hatib and Reynolds Widhiyanurrochmansyah",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 3rd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2023 ; Conference date: 09-08-2023 Through 10-08-2023",

year = "2023",

doi = "10.1109/ICE3IS59323.2023.10335210",

language = "English",

series = "Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "37--40",

booktitle = "Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System",

}

Widhiyanuriyawan, D , Hamidi, N , Darjito, Hatib, R & Widhiyanurrochmansyah, R 2023, Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. in Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023. Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023, Institute of Electrical and Electronics Engineers Inc., pp. 37-40, 3rd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2023, Hybrid, Yogyakarta, Indonesia, 9/08/23. https://doi.org/10.1109/ICE3IS59323.2023.10335210

Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. / Widhiyanuriyawan, Denny ; Hamidi, Nurcholish ; Darjito et al.
Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023. Institute of Electrical and Electronics Engineers Inc., 2023. p. 37-40 (Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material

AU - Widhiyanuriyawan, Denny

AU - Hamidi, Nurcholish

AU - Darjito,

AU - Hatib, Rustan

AU - Widhiyanurrochmansyah, Reynolds

PY - 2023

Y1 - 2023

N2 - Perovskite solar cells are an attractive type of solar cell for development due to their simplicity of manufacture and competitive efficiency. One of the essential components of PSC fabrication is hole transport material. This study aims to fabricate perovskite solar cells using nickel oxide (NiO) and graphene oxide (GO). The spin coating technique is used in the experiment to know the impact of mixing NiO and GO in perovskite solar cells. The perovskite layer morphology was tested by Scanning Electron Microscope (SEM). The results of this experiment showed that the PSC utilizing NiO/GO material yields a smaller pore size than NiO. In addition, the spin coating process affects the power conversion energy value, with the highest PCE value obtained at 15.3% at 1000 rpm.

AB - Perovskite solar cells are an attractive type of solar cell for development due to their simplicity of manufacture and competitive efficiency. One of the essential components of PSC fabrication is hole transport material. This study aims to fabricate perovskite solar cells using nickel oxide (NiO) and graphene oxide (GO). The spin coating technique is used in the experiment to know the impact of mixing NiO and GO in perovskite solar cells. The perovskite layer morphology was tested by Scanning Electron Microscope (SEM). The results of this experiment showed that the PSC utilizing NiO/GO material yields a smaller pore size than NiO. In addition, the spin coating process affects the power conversion energy value, with the highest PCE value obtained at 15.3% at 1000 rpm.

KW - graphene oxide (GO)

KW - nickel oxide (NiO)

KW - perovskite solar cell

KW - spin coating

UR - https://www.scopus.com/pages/publications/85181537149

U2 - 10.1109/ICE3IS59323.2023.10335210

DO - 10.1109/ICE3IS59323.2023.10335210

M3 - Conference contribution

AN - SCOPUS:85181537149

T3 - Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023

SP - 37

EP - 40

BT - Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 3rd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2023

Y2 - 9 August 2023 through 10 August 2023

ER -

Widhiyanuriyawan D , Hamidi N , Darjito, Hatib R, Widhiyanurrochmansyah R. Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material. In Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023. Institute of Electrical and Electronics Engineers Inc. 2023. p. 37-40. (Proceedings - 2023 3rd International Conference on Electronic and Electrical Engineering and Intelligent System: Responsible Technology for Sustainable Humanity, ICE3IS 2023). doi: 10.1109/ICE3IS59323.2023.10335210

Fabrication of Perovskite Solar Cell (PSC) Using NiO/GO Material

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this