Experimental effect of wind and heavy rain on increased splash erosion using rainfall simulator

To investigate the erosion process that occurs, rainfall simulation is used with a model scale for natural rain events in laboratory conditions. The calculation of erosion and any soil erosion with a slope setting of 5% was carried out experimentally on a laboratory scale using a rain simulator and adding wind using a 2-inch snail blower. Experiments carried out in the laboratory included erosion tests driven by rain and erosion tests by rain, which were given additional wind variables. Rain intensity used for testing is using discharge 1 litre/minute,1.5 litre/minute, and 2 litre/minute as a representative variation of rainfall. The occurrence of rain and wind simultaneously within a certain period will cause greater loss of soil. Although many studies have been conducted on the effects of rain and the combined effects of wind on soil erosion, only a limited number of studies have focused on the combination of the two variables that occur together. The results showed that in the applied rain intensity and wind factor, the collision of the kinetic energy of the rain driven by the wind resulted in higher erosion when compared to that without the influence of the wind.