TY - GEN
T1 - Development of LoRaWAN Blind ADR for Mobile Realtime Monitoring System
AU - Prasetvo Adi, Puput Dani
AU - Sihombing, Volvo
AU - Ardi, Idil
AU - Maulana, Fairuz Iqbal
AU - Santiko, Arief Budi
AU - Zulkarnain, Riza
AU - Wirawan, Adi
AU - Louhenapessy, Bendjamin Benny
AU - Prastiyono, Yudi
AU - Sukma, Irawan
AU - Parenreng, Jumadi Mabe
AU - Edy Purnomo, Muhammad Fauzan
AU - Hastangka,
AU - Munthe, Ibnu Rasvid
AU - Adiprabowo, Tjahjo
N1 - Publisher Copyright:
© 2023 IEEE.
PY - 2023
Y1 - 2023
N2 - A telecommunication system must minimize collisions, especially in LoRaWAnnetworks. This system will analyze the Quality of Service of LoRa and LoRaWancommunication systems within the scope of end nodes constantly moving freely. Therefore, the resulting throughput and packet loss cannot be predicted, and an appropriate method is needed to overcome this by using Blind Adaptive Data Rate (ADR). Adaptive Data Rate in this research will be developed into Blind Adaptive Data Rate due to the Mobile Node condition factor. ADR is a mechanism that allows LoRa networks to save battery power or sensor nodes and become stable data transmission without much packet loss (bytes). It can also dynamically adjust the data transmission rate (DR). The development of Blind-ADR is the unpredictable node mobility factor, thus affecting the data rate (DR). This mechanism decreases collisions in LoRaWan,meaning that telecommunications' effectiveness (%) increases in data rate (bytes). ADR can increase the data rate by 20-30% and reduce airtime by 20-30%, while Blind ADR can increase the data rate by 10-20% and reduce airtime by 10-20%.
AB - A telecommunication system must minimize collisions, especially in LoRaWAnnetworks. This system will analyze the Quality of Service of LoRa and LoRaWancommunication systems within the scope of end nodes constantly moving freely. Therefore, the resulting throughput and packet loss cannot be predicted, and an appropriate method is needed to overcome this by using Blind Adaptive Data Rate (ADR). Adaptive Data Rate in this research will be developed into Blind Adaptive Data Rate due to the Mobile Node condition factor. ADR is a mechanism that allows LoRa networks to save battery power or sensor nodes and become stable data transmission without much packet loss (bytes). It can also dynamically adjust the data transmission rate (DR). The development of Blind-ADR is the unpredictable node mobility factor, thus affecting the data rate (DR). This mechanism decreases collisions in LoRaWan,meaning that telecommunications' effectiveness (%) increases in data rate (bytes). ADR can increase the data rate by 20-30% and reduce airtime by 20-30%, while Blind ADR can increase the data rate by 10-20% and reduce airtime by 10-20%.
KW - blind ADR
KW - LoRa node communication
KW - mobility node
KW - packet loss
KW - Quality of Service
UR - https://www.scopus.com/pages/publications/85187219881
U2 - 10.1109/ICITCOM60176.2023.10441845
DO - 10.1109/ICITCOM60176.2023.10441845
M3 - Conference contribution
AN - SCOPUS:85187219881
T3 - Proceeding - International Conference on Information Technology and Computing 2023, ICITCOM 2023
SP - 17
EP - 22
BT - Proceeding - International Conference on Information Technology and Computing 2023, ICITCOM 2023
A2 - Chen, Hsing-Chung
A2 - Damarjati, Cahya
A2 - Blum, Christian
A2 - Jusman, Yessi
A2 - Kanafiah, Siti Nurul Aqmariah Mohd
A2 - Ejaz, Waleed
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2023 International Conference on Information Technology and Computing, ICITCOM 2023
Y2 - 1 December 2023 through 2 December 2023
ER -