Design and performance analysis of PID controller for extended output voltage buck-boost converter

Unggul Wibawa; Eka Mardiana; Lunde Ardhenta

doi:10.1109/EECCIS49483.2020.9263458

Design and performance analysis of PID controller for extended output voltage buck-boost converter

Unggul Wibawa
, Eka Mardiana
, Lunde Ardhenta

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Extended-output-voltage (EOV) buck-boost converter is the development of conventional buck-boost converter which has greater voltage gain. This topology could be used for several applications that require a wider output voltage range such as the utilization of renewable energy or other applications. However, the output voltage response characteristics of EOV buck-boost converter have a large overshoot and time to reach a steady state condition is quite long in open loop state. This condition will generate unexpected response during input voltage and load value changes. In order to produce the desired output voltage, the PID controller is used in this research. The parameters Ki, Kp, and Kd are obtained by using direct synthesis method. The converter will be modelled using state space averaging technique. From the simulation, the application of the PID controller on EOV buck-boost converter can improve the transient response of the output voltage and maintain the output voltage value remains stable at the specified value despite changes in input voltages and load.

Original language	English
Title of host publication	EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	31-36
Number of pages	6
ISBN (Electronic)	9781728171098
DOIs	https://doi.org/10.1109/EECCIS49483.2020.9263458
Publication status	Published - 26 Aug 2020
Event	10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, EECCIS 2020 - Malang, Indonesia Duration: 26 Aug 2020 → 28 Aug 2020

Publication series

Name	EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar

Conference

Conference	10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, EECCIS 2020
Country/Territory	Indonesia
City	Malang
Period	26/08/20 → 28/08/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Buck-boost
Close loop
Direct synthesis
PID controller

Access to Document

10.1109/EECCIS49483.2020.9263458

Cite this

Wibawa, U., Mardiana, E., & Ardhenta, L. (2020). Design and performance analysis of PID controller for extended output voltage buck-boost converter. In EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar (pp. 31-36). Article 9263458 (EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EECCIS49483.2020.9263458

Wibawa, Unggul ; Mardiana, Eka ; Ardhenta, Lunde. / Design and performance analysis of PID controller for extended output voltage buck-boost converter. EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar. Institute of Electrical and Electronics Engineers Inc., 2020. pp. 31-36 (EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar).

@inproceedings{73a935babd4d435da69b1f428aadb5fd,

title = "Design and performance analysis of PID controller for extended output voltage buck-boost converter",

abstract = "Extended-output-voltage (EOV) buck-boost converter is the development of conventional buck-boost converter which has greater voltage gain. This topology could be used for several applications that require a wider output voltage range such as the utilization of renewable energy or other applications. However, the output voltage response characteristics of EOV buck-boost converter have a large overshoot and time to reach a steady state condition is quite long in open loop state. This condition will generate unexpected response during input voltage and load value changes. In order to produce the desired output voltage, the PID controller is used in this research. The parameters Ki, Kp, and Kd are obtained by using direct synthesis method. The converter will be modelled using state space averaging technique. From the simulation, the application of the PID controller on EOV buck-boost converter can improve the transient response of the output voltage and maintain the output voltage value remains stable at the specified value despite changes in input voltages and load.",

keywords = "Buck-boost, Close loop, Direct synthesis, PID controller",

author = "Unggul Wibawa and Eka Mardiana and Lunde Ardhenta",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, EECCIS 2020 ; Conference date: 26-08-2020 Through 28-08-2020",

year = "2020",

month = aug,

day = "26",

doi = "10.1109/EECCIS49483.2020.9263458",

language = "English",

series = "EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "31--36",

booktitle = "EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar",

}

Wibawa, U, Mardiana, E & Ardhenta, L 2020, Design and performance analysis of PID controller for extended output voltage buck-boost converter. in EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar., 9263458, EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, Institute of Electrical and Electronics Engineers Inc., pp. 31-36, 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, EECCIS 2020, Malang, Indonesia, 26/08/20. https://doi.org/10.1109/EECCIS49483.2020.9263458

Design and performance analysis of PID controller for extended output voltage buck-boost converter. / Wibawa, Unggul; Mardiana, Eka; Ardhenta, Lunde.
EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar. Institute of Electrical and Electronics Engineers Inc., 2020. p. 31-36 9263458 (EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and performance analysis of PID controller for extended output voltage buck-boost converter

AU - Wibawa, Unggul

AU - Mardiana, Eka

AU - Ardhenta, Lunde

PY - 2020/8/26

Y1 - 2020/8/26

N2 - Extended-output-voltage (EOV) buck-boost converter is the development of conventional buck-boost converter which has greater voltage gain. This topology could be used for several applications that require a wider output voltage range such as the utilization of renewable energy or other applications. However, the output voltage response characteristics of EOV buck-boost converter have a large overshoot and time to reach a steady state condition is quite long in open loop state. This condition will generate unexpected response during input voltage and load value changes. In order to produce the desired output voltage, the PID controller is used in this research. The parameters Ki, Kp, and Kd are obtained by using direct synthesis method. The converter will be modelled using state space averaging technique. From the simulation, the application of the PID controller on EOV buck-boost converter can improve the transient response of the output voltage and maintain the output voltage value remains stable at the specified value despite changes in input voltages and load.

AB - Extended-output-voltage (EOV) buck-boost converter is the development of conventional buck-boost converter which has greater voltage gain. This topology could be used for several applications that require a wider output voltage range such as the utilization of renewable energy or other applications. However, the output voltage response characteristics of EOV buck-boost converter have a large overshoot and time to reach a steady state condition is quite long in open loop state. This condition will generate unexpected response during input voltage and load value changes. In order to produce the desired output voltage, the PID controller is used in this research. The parameters Ki, Kp, and Kd are obtained by using direct synthesis method. The converter will be modelled using state space averaging technique. From the simulation, the application of the PID controller on EOV buck-boost converter can improve the transient response of the output voltage and maintain the output voltage value remains stable at the specified value despite changes in input voltages and load.

KW - Buck-boost

KW - Close loop

KW - Direct synthesis

KW - PID controller

UR - https://www.scopus.com/pages/publications/85099587767

U2 - 10.1109/EECCIS49483.2020.9263458

DO - 10.1109/EECCIS49483.2020.9263458

M3 - Conference contribution

AN - SCOPUS:85099587767

T3 - EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar

SP - 31

EP - 36

BT - EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar, EECCIS 2020

Y2 - 26 August 2020 through 28 August 2020

ER -

Wibawa U, Mardiana E, Ardhenta L. Design and performance analysis of PID controller for extended output voltage buck-boost converter. In EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar. Institute of Electrical and Electronics Engineers Inc. 2020. p. 31-36. 9263458. (EECCIS 2020 - 2020 10th Electrical Power, Electronics, Communications, Controls, and Informatics Seminar). doi: 10.1109/EECCIS49483.2020.9263458

Design and performance analysis of PID controller for extended output voltage buck-boost converter

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this