Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz

Srisanto Sotyohadi; Sholeh Hadi Pramono; Moechammad Sarosa

doi:10.1007/978-981-287-988-2_41

Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz

Srisanto Sotyohadi^*
, Sholeh Hadi Pramono
, Moechammad Sarosa

^*Corresponding author for this work

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

This paper, a (image presented)(is read “Ha”) shaped slotted microstrip antenna is designed, fabricated and analyzed. The proposed antenna used (image presented)-shape slot is to improve return loss and operate for wireless LAN 2.4 GHz frequency band. The proposed antenna utilize transmission line model for analysis and simulation for return loss as well as VSWR with the support CST studio software. After doing some optimization on simulation, finally the dimension of microstrip patch antenna (MSPA) which operated on WLAN frequency 2.4 GHz is obtained. The best simulation results are then used as reference for MSPA fabrication on FR4 substrate with dielectric constant (ε_r)= 4:3 and thickness (h) = 1.5 mm. The measurement result shows that the (image presented)-slot microstrip antenna can achieve return loss (S11) −29.81 dB and VSWR 1.068 at 2.4640770 GHz. The proposed design shows that (image presented) shape technically can be used as slot within patch to improve microstrip antenna performance.

Original language	English
Title of host publication	Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015
Editors	Felix Pasila, Yusak Tanoto, Resmana Lim, Murtiyanto Santoso, Nemuel Daniel Pah
Publisher	Springer Verlag
Pages	383-391
Number of pages	9
ISBN (Print)	9789812879868
DOIs	https://doi.org/10.1007/978-981-287-988-2_41
Publication status	Published - 2016
Event	2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015 - Bali, Indonesia Duration: 9 Sept 2015 → 12 Sept 2015

Publication series

Name	Lecture Notes in Electrical Engineering
Volume	365
ISSN (Print)	1876-1100
ISSN (Electronic)	1876-1119

Conference

Conference	2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015
Country/Territory	Indonesia
City	Bali
Period	9/09/15 → 12/09/15

Keywords

(Image presented)-shape slot
CST studio software
Microstrip antenna
Return loss
Transmission line

Access to Document

10.1007/978-981-287-988-2_41

Cite this

Sotyohadi, S., Pramono, S. H., & Sarosa, M. (2016). Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz. In F. Pasila, Y. Tanoto, R. Lim, M. Santoso, & N. D. Pah (Eds.), Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015 (pp. 383-391). (Lecture Notes in Electrical Engineering; Vol. 365). Springer Verlag. https://doi.org/10.1007/978-981-287-988-2_41

Sotyohadi, Srisanto ; Pramono, Sholeh Hadi ; Sarosa, Moechammad. / Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz. Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015. editor / Felix Pasila ; Yusak Tanoto ; Resmana Lim ; Murtiyanto Santoso ; Nemuel Daniel Pah. Springer Verlag, 2016. pp. 383-391 (Lecture Notes in Electrical Engineering).

@inproceedings{599d13f88ab543a6b299255da7d659b6,

title = "Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz",

abstract = "This paper, a (image presented)(is read “Ha”) shaped slotted microstrip antenna is designed, fabricated and analyzed. The proposed antenna used (image presented)-shape slot is to improve return loss and operate for wireless LAN 2.4 GHz frequency band. The proposed antenna utilize transmission line model for analysis and simulation for return loss as well as VSWR with the support CST studio software. After doing some optimization on simulation, finally the dimension of microstrip patch antenna (MSPA) which operated on WLAN frequency 2.4 GHz is obtained. The best simulation results are then used as reference for MSPA fabrication on FR4 substrate with dielectric constant (εr)= 4:3 and thickness (h) = 1.5 mm. The measurement result shows that the (image presented)-slot microstrip antenna can achieve return loss (S11) −29.81 dB and VSWR 1.068 at 2.4640770 GHz. The proposed design shows that (image presented) shape technically can be used as slot within patch to improve microstrip antenna performance.",

keywords = "(Image presented)-shape slot, CST studio software, Microstrip antenna, Return loss, Transmission line",

author = "Srisanto Sotyohadi and Pramono, \{Sholeh Hadi\} and Moechammad Sarosa",

note = "Publisher Copyright: {\textcopyright} Springer Science+Business Media Singapore 2016.; 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015 ; Conference date: 09-09-2015 Through 12-09-2015",

year = "2016",

doi = "10.1007/978-981-287-988-2\_41",

language = "English",

isbn = "9789812879868",

series = "Lecture Notes in Electrical Engineering",

publisher = "Springer Verlag",

pages = "383--391",

editor = "Felix Pasila and Yusak Tanoto and Resmana Lim and Murtiyanto Santoso and Pah, \{Nemuel Daniel\}",

booktitle = "Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015",

}

Sotyohadi, S, Pramono, SH & Sarosa, M 2016, Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz. in F Pasila, Y Tanoto, R Lim, M Santoso & ND Pah (eds), Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015. Lecture Notes in Electrical Engineering, vol. 365, Springer Verlag, pp. 383-391, 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015, Bali, Indonesia, 9/09/15. https://doi.org/10.1007/978-981-287-988-2_41

Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz. / Sotyohadi, Srisanto; Pramono, Sholeh Hadi; Sarosa, Moechammad.
Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015. ed. / Felix Pasila; Yusak Tanoto; Resmana Lim; Murtiyanto Santoso; Nemuel Daniel Pah. Springer Verlag, 2016. p. 383-391 (Lecture Notes in Electrical Engineering; Vol. 365).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz

AU - Sotyohadi, Srisanto

AU - Pramono, Sholeh Hadi

AU - Sarosa, Moechammad

N1 - Publisher Copyright: © Springer Science+Business Media Singapore 2016.

PY - 2016

Y1 - 2016

N2 - This paper, a (image presented)(is read “Ha”) shaped slotted microstrip antenna is designed, fabricated and analyzed. The proposed antenna used (image presented)-shape slot is to improve return loss and operate for wireless LAN 2.4 GHz frequency band. The proposed antenna utilize transmission line model for analysis and simulation for return loss as well as VSWR with the support CST studio software. After doing some optimization on simulation, finally the dimension of microstrip patch antenna (MSPA) which operated on WLAN frequency 2.4 GHz is obtained. The best simulation results are then used as reference for MSPA fabrication on FR4 substrate with dielectric constant (εr)= 4:3 and thickness (h) = 1.5 mm. The measurement result shows that the (image presented)-slot microstrip antenna can achieve return loss (S11) −29.81 dB and VSWR 1.068 at 2.4640770 GHz. The proposed design shows that (image presented) shape technically can be used as slot within patch to improve microstrip antenna performance.

AB - This paper, a (image presented)(is read “Ha”) shaped slotted microstrip antenna is designed, fabricated and analyzed. The proposed antenna used (image presented)-shape slot is to improve return loss and operate for wireless LAN 2.4 GHz frequency band. The proposed antenna utilize transmission line model for analysis and simulation for return loss as well as VSWR with the support CST studio software. After doing some optimization on simulation, finally the dimension of microstrip patch antenna (MSPA) which operated on WLAN frequency 2.4 GHz is obtained. The best simulation results are then used as reference for MSPA fabrication on FR4 substrate with dielectric constant (εr)= 4:3 and thickness (h) = 1.5 mm. The measurement result shows that the (image presented)-slot microstrip antenna can achieve return loss (S11) −29.81 dB and VSWR 1.068 at 2.4640770 GHz. The proposed design shows that (image presented) shape technically can be used as slot within patch to improve microstrip antenna performance.

KW - (Image presented)-shape slot

KW - CST studio software

KW - Microstrip antenna

KW - Return loss

KW - Transmission line

UR - https://www.scopus.com/pages/publications/84959204763

U2 - 10.1007/978-981-287-988-2_41

DO - 10.1007/978-981-287-988-2_41

M3 - Conference contribution

AN - SCOPUS:84959204763

SN - 9789812879868

T3 - Lecture Notes in Electrical Engineering

SP - 383

EP - 391

BT - Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015

A2 - Pasila, Felix

A2 - Tanoto, Yusak

A2 - Lim, Resmana

A2 - Santoso, Murtiyanto

A2 - Pah, Nemuel Daniel

PB - Springer Verlag

T2 - 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015

Y2 - 9 September 2015 through 12 September 2015

ER -

Sotyohadi S, Pramono SH, Sarosa M. Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz. In Pasila F, Tanoto Y, Lim R, Santoso M, Pah ND, editors, Proceedings of 2nd International Conference on Electrical Systems, Technology and Information, ICESTI 2015. Springer Verlag. 2016. p. 383-391. (Lecture Notes in Electrical Engineering). doi: 10.1007/978-981-287-988-2_41

Design and fabrication of “ha (image presented)” shape-slot microstrip antenna for WLAN 2.4 GHz

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this