ANALYSIS PROJECTILE PERFORMANCE IN BALLISTIC TESTS USING COMPRESSED AIR GUN

Ballistic resistance is affected by the projectile and armor material used. The character and behavior of the projectile affects its ability to damage and penetrate armor. The velocity, mass and shape of the projectile are the main factors in determining the ability of the projectile to penetrate armor in this case the target plate. Therefore, this study aims to determine and analyze the effect of projectile mass and shape on the velocity with which it penetrates the armor material using a compressed air gun. Armor material as a ballistic test target using carbon steel plate with a thickness of 0.8 mm; 1.2 mm and 1.8 mm. Projectiles of lead materials with different masses and shapes are fired from the air gun under controlled air pressure, set at 2000 Psi, 3000 Psi, and 4000 Psi to provide thrust in the barrel. The plat target is placed at a distance of 5 m from the air gun. Speed gauges are placed after the air gun and after the target plate to determine the projectile’s rate before and after passing through the target plate. The test results concluded that the velocity of the projectile ejected from the compressed air gun was inf luenced by the magnitude of the pressure and the mass of the projectile. The mass of the projectile has a more dominant effect on the velocity of the projectile compared to the amount of pressure applied. Different projectile shapes with the same mass have no significant effect on the velocity. However, the heavier mass projectile outperforms the lighter mass projectile through the target plate. It is required the right combination of velocity and mass of the projectile to be able to penetrate the target plate.